Fabrication of a mandibular implant-retained overdenture using an existing subperiosteal implant: A clinical report.

A 64-year-old edentulous woman with a mandibular fracture received a subperiosteal implant for fracture fixation and dental rehabilitation. However, the ball abutments were submerged by the soft tissue because they were too short. Therefore, we designed a connector to lengthen the attachment and achieve adequate stability and retention for the overdenture.

Conservative Management of Maxillary and Mandibular Fractures in a Pediatric Patient With a Modified Open Cap Splint: A Case Report.

Pediatric maxillofacial fractures, which are not very prevalent, account for around 5% of all face injuries. Children under the age of 13 are more susceptible to craniofacial injuries because they have a larger cerebral mass-to-body ratio than adults. The fracture pattern in children does not resemble that of adults, due to which the treatment of pediatric fractures differs from that of adults and can pose substantial difficulties to the pediatric dentist due to many factors, including the complex anatomy of the developing jaw. In this case report, a 5-year-old male patient presented with an injury to the upper and lower jaw. A case was managed with a conservative approach by using a modified open cap splint. A radiographic investigation, including CT brain and face, was done, which revealed the mandibular symphyseal fracture, bilateral condyle, and right Lefort II fracture. A modified open cap splint was fabricated and fixed with circummandibular and circumzygomatic wiring under general anesthesia. After two months, the fractured site showed good healing on orthopantomography (OPG), and satisfactory occlusion was achieved. The patient was kept on monthly follow-ups for up to five months. Treatment guidelines for pediatric maxillary and mandibular fractures are different from those for adults in that most pediatric cases are managed by a conservative approach. Cap splints are a versatile treatment option for juvenile mandibular fractures because they can be used to restore function and aesthetics with minimal morbidity, do not impede jaw growth or the development of dentition, and can be applied to patients of a wider range of ages.

Effective strategies in the management of anterior mandibular fractures: a comprehensive systematic review.

This review examines the prevailing modalities for fractures of the anterior mandible, which represent a significant proportion of the maxillofacial injuries commonly treated by oral and maxillofacial surgeons. The article traces the historical shift from conservative techniques to the dominant management strategies of open reduction and fixation. Encompassing a range of studies, the review, in accordance with PRISMA 2020 recommendations, meticulously examines various fixation methods, assessing their efficacy in achieving stability of fracture, early healing, and mobilisation. The comparison of these methods highlights their unique advantages and limitations, and demonstrates the need for more nuanced and precise approaches. The review emphasises evidence-based methodology in the management of anterior mandibular fractures (AMF), highlighting the benefits offered by innovative techniques such as 3D miniplates. It also acknowledges the advantages provided by older fixation devices such as lag screws. The importance of postoperative outcomes and the need for tailored treatment strategies are recognised, considering the complex nature of these fractures.

Dental Implants Acting as External Fixation for the Fracture of Severe Atrophic Mandible: A Case Report.

Treatment of edentulous and atrophic mandibular fractures is extremely difficult. Generally, mandibular fractures are repaired and fixed as internal fixation using a reconstruction plate or miniplates with intra- or extraoral approach. Few cases in which external fixation including a transmucosal fixation was performed have also been reported. We report a case of atrophic and edentulous mandibular fracture which was healed by the fixation using dental implants and implant-supported bridge.

M3YOLOv5: Feature enhanced YOLOv5 model for mandibular fracture detection.

BACKGROUND: It is very important to detect mandibular fracture region. However, the size of mandibular fracture region is different due to different anatomical positions, different sites and different degrees of force. It is difficult to locate and recognize fracture region accurately. METHODS: To solve these problems, M3YOLOv5 model is proposed in this paper. Three feature enhancement strategies are designed, which improve the ability of model to locate and recognize mandibular fracture region. Firstly, Global-Local Feature Extraction Module (GLFEM) is designed. By effectively combining Convolutional Neural Network (CNN) and Transformer, the problem of insufficient global information extraction ability of CNN is complemented, and the positioning ability of the model to the fracture region is improved. Secondly, in order to improve the interaction ability of context information, Deep-Shallow Feature Interaction Module (DSFIM) is designed. In this module, the spatial information in the shallow feature layer is embedded to the deep feature layer by the spatial attention mechanism, and the semantic information in the deep feature layer is embedded to the shallow feature layer by the channel attention mechanism. The fracture region recognition ability of the model is improved. Finally, Multi-scale Multi receptive-field Feature Mixing Module (MMFMM) is designed. Deep separate convolution chains are used in this modal, which is composed by multiple layers of different scales and different dilation coefficients. This method provides richer receptive field for the model, and the ability to detect fracture region of different scales is improved. RESULTS: The precision rate, mAP value, recall rate and F1 value of M3YOLOv5 model on mandibular fracture CT data set are 97.18%, 96.86%, 94.42% and 95.58% respectively. The experimental results show that there is better performance about M3YOLOv5 model than the mainstream detection models. CONCLUSION: The M3YOLOv5 model can effectively recognize and locate the mandibular fracture region, which is of great significance for doctors' clinical diagnosis.

Correlation between Malocclusion and Mandibular Fractures: An Experimental Study Comparing Dynamic Finite Element Models and Clinical Case Studies.

Mandibular fractures are very common in maxillofacial trauma surgery. While previous studies have focused on possible risk factors related to post-operative complications, none have tried to identify pre-existing conditions that may increase the risk of mandibular fractures. We hypothesized, through clinical observation, that anatomical conditions involving poor dental contacts, such as malocclusions, may increase the risk of mandibular fractures. This work was subdivided into two parts. In the first part, Digital Imaging and Communications in Medicine (DICOM) data of four healthy patients characterized by different dentoskeletal occlusions (class I, class II, class III, and anterior open bite) have been used to develop four finite element models (FEMs) that accurately reproduce human bone structure. A vertical and lateral impact have been simulated at increasing speed on each model, analyzing the force distribution within the mandibular bone. Both vertical and lateral impact showed higher level of stress at the impact point and in the condylar area in models characterized by malocclusion. Specifically, the class III and the open bite models, at the same speed of impact, had higher values for a longer period, reaching critical stress levels that are correlated with mandibular fracture, while normal occlusion seems to be a protective condition. In the second part of this study, the engineering results were validated through the comparison with a sample of patients previously treated for mandibular fracture. Data from 223 mandibular fractures, due to low-energy injuries, were retrospectively collected to evaluate a possible correlation between pre-existing malocclusion and fracture patterns, considering grade of displacement, numbers of foci, and associated CFI score. Patients were classified, according to their occlusion, into Class I, Class II, Class III, and anterior open bite or poor occlusal contact (POC). Class I patients showed lower frequencies of fracture than class II, III, and open bite or POC patients. Class I was associated with displaced fractures in 16.1% of cases, class II in 47.1%, class III in 48.8% and open bite/POC in 65.2% of cases (p-value < 0.0001). In class I patients we observed a single non-displaced fracture in 51.6% of cases, compared to 12.9% of Class II, 19.5% of Class III and 22.7% of the open bite/POC group. Our analysis shows that class I appears to better dissipate forces applied on the mandible in low-energy injuries. A higher number of dental contacts showed a lower rate of multifocal and displaced fractures, mitigating the effect of direct forces onto the bone. The correlation between clinical data and virtual simulation on FEM models seems to point out that virtual simulation successfully predicts fracture patterns and risk of association with different type of occlusion. Better knowledge of biomechanics and force dissipation on the human body may lead to the development of more effective safety devices, and help select patients to plan medical, orthodontic/dental, and/or surgical intervention to prevent injuries.

Comparison of Neurosensory Recovery of the Inferior Alveolar Nerve After Open and Closed Reduction for Mandibular Fractures: A Prospective Study.

INTRODUCTION: Traumatic mandibular fractures are the most common fractures of the facial region and are associated with loss of neurosensation in the inferior alveolar nerve (IAN). The present study aimed to compare IAN recovery after traumatic mandibular fractures between the open and closed reduction methods. MATERIALS AND METHODS: The study included 90 patients with traumatic mandibular fractures of the body, angle, and symphysis, divided into two groups of 45 patients: group 1 was treated with closed reduction and fixation with rich arch-bar fixation under local anesthesia, and group 2 was treated with open reduction and rigid internal fixation with 2-mm titanium mini plates and monocortical screws (6 mm), and the plate was fixed to the fractured bony fragments. All patients underwent neurosensory testing using the Zuniga and Essick algorithm at baseline (preoperative), one week after surgery (postoperative), at three months, and at six months of follow-up. RESULTS: No statistically significant differences were observed in IAN recovery between the groups. The most common site of fracture was the body (44% in group 1 and 56% in group 2). The maximum recovery was observed in the younger age group (25-30 years). At baseline, functional nerve recovery was observed in 40 cases (88%) in group 1 and 38 cases (84%) in group 2, and the difference was not statistically significant. Levels A and B tests were affected by surgical management and improved after three months. The total recovery in group 1 ranged from 60% to 80%, and that in group 2 ranged from 56% to 72%. CONCLUSION: Based on the findings of the current study, both methods are recommended for surgical management of traumatic mandibular fractures with IAN recovery in 60-80% of cases six months postoperatively.

A Proof of Concept: Optimized Jawbone-Reduction Model for Mandibular Fracture Surgery.

Previous research on computer-assisted jawbone reduction for mandibular fracture surgery has only focused on the relationship between fractured sections disregarding proper dental occlusion with the maxilla. To overcome malocclusion caused by overlooking dental articulation, this study aims to provide a model for jawbone reduction based on dental occlusion. After dental landmarks and fracture sectional features are extracted, the maxilla and two mandible segments are aligned first using the extracted dental landmarks. A swarm-based optimization is subsequently performed by simultaneously observing the fracture section fitting and the dental occlusion condition. The proposed method was evaluated using jawbone data of 12 subjects with simulated and real mandibular fractures. Results showed that the optimized model achieved both accurate jawbone reduction and desired dental occlusion, which may not be possible by existing methods.

Wire Osteosynthesis in the Treatment of Mandible Fractures in Low Resource Settings: A Force Study.

Study Design: Cadaveric investigation. Objective: Rigid internal fixation (RIF) using plates and screws is often not feasible in low and middle-income countries due to limited resources. Interosseous wiring to achieve semi-rigid fixation is often used, but lacks biomechanical force data. Herein we aim to quantitatively compare interosseous wiring to RIF. Methods: Cadaveric mandibles were fractured at the parasymphysis and angle. Fixation was achieved using interosseous wiring in both single wire loop and figure-of-eight formations, as well as plate and screw fixation (n = 5 for each fixation type at each fracture site). A force gauge was used to measure the number of Newtons (N) required to achieve diastasis and complete failure at the fixation site. Results: For angle fractures, the mean force required for initial diastasis was 4.1, 5.9, and 10.9 N for single wire, figure-of-eight wiring, and plating respectively (P < .001). Complete failure was achieved with 152.9, 168.9, and 237.6 N of force for the three methods, respectively (P < .001). Complete failure was achieved for parasymphyseal fractures with 197.7, 263.0, and 262.8 N of force for single wire, figure-of-eight wiring, and plating respectively (P = .002). Forces to achieve initial diastasis for parasymphyseal fractures were not statistically significant among the three fixation methods (P = .29). Conclusions: Figure-of-eight interosseous wiring resists comparable forces across mandibular fractures compared to the gold standard of plating. In resource-limited settings when plates and screws are not available, this technique can be considered to achieve semi-rigid fixation of mandibular fractures.

Digitally driven surgical guide planning.

To investigate the role of a fully digital process in the surgical treatment of mandibular fractures in children. We analyzed a complete dataset from 22 children with mandibular fractures treated with digital surgical assistance. The patient's treatment process included preoperative thin layer CT (Computed Tomography) scanning, computer-aided design (3D reconstruction, virtual reduction, and internal fixation device determination and shaping), and 3D printing (jaw model, bite plate). We used occlusal and shaping plates during surgery to assist in fracture reduction and fixation. During the follow-up, we observed the occurrence of fracture healing, occlusal relationships, opening degrees, and complications in pediatric patients after surgery. Next, we used the 3D overlay function of MIMICS software to compare the preoperative surgical design with postoperative jaw imaging data to evaluate the overall surgical effect. The postoperative imaging data showed good fracture healing, normal occlusion during follow-up, and significant improvement in opening degrees. The mean preoperative opening degree was 23.59 ± 2.89 mm, and the mean postoperative opening degree was 29.82 ± 1.79 mm; there was a significant difference between these two parameters (p < 0.05). There were no complications such as tooth germ injury, nerve injury or fracture block displacement. The postoperative mandibular imaging data was imported into MIMICS software for 3D overlay visualization, and the postoperative mandibular morphology recovery was well-matched with the preoperative design. We measured the average upper deviation (0.65 ± 0.09) mm and the average lower deviation (-0.57 ± 0.14) mm. The fully digital process has a precise, minimally invasive, and safe effect in the surgical treatment of mandibular fractures in children, and the clinical effect is satisfactory.

Can dynamic elastic therapy be established as the standard protocol of closed reduction for moderately displaced extracapsular condylar fractures?

OBJECTIVE: This study was conducted with the aim to establish standard technique of closed reduction (CR) and compare functional outcomes in patients of moderately displaced unilateral extracapsular condylar fractures. MATERIAL AND METHODS: This study is a retrospective randomized controlled trial, conducted at a tertiary care hospital setting from August, 2013 to November, 2018. Patients of unilateral extracapsular condylar fractures with ramus shortening < 7mm and deviation < 35° were divided in two groups by drawing lots and were treated by dynamic elastic therapy and maxillomandibular fixation (MMF). Mean and standard deviation were calculated for quantitative variables, and one way analysis of variance (ANOVA) and Pearson's Chi-square test were used to determine significance of outcomes between two modalities of CR. P value < 0.05 was taken as significant. RESULTS: The numbers of patients treated by dynamic elastic therapy and MMF were 76 (38 in each group). Out of which 48 (63.15%) were male and 28 (36.84%) were female. The ratio of male to female was 1.7:1. The mean ± standard deviation (SD) of age was 32 ± 9.57 years. In patients treated by dynamic elastic therapy, the mean ± SD (at 6-month follow-up) of loss of ramus height (LRH), maximum incisal opening (MIO) and opening deviation were 4.6mm ± 1.08mm, 40.4mm ± 1.57mm and 1.1mm ± 0.87mm respectively. Whereas, LRH, MIO and opening deviation were 4.6mm ± 0.85mm, 40.4mm ± 2.37mm and 0.8mm ± 0.63mm respectively by MMF therapy. One-way ANOVA was statistically insignificant (P value > 0.05) for above mentioned outcomes. Pre-traumatic occlusion was achieved in 89.47% of patients by MMF and in 86.84% patients by dynamic elastic therapy. Pearson's Chi-square test was statistically insignificant (p value < 0.05) for occlusion. CONCLUSION: Parallel results were obtained for both modalities; thus, the technique as dynamic elastic therapy, which promotes early mobilization and functional rehabilitation, can be favored as standard technique of closed reduction for moderately displaced extracapsular condylar fractures. This technique eases patients' stress associated with MMF and prevents ankylosis.

Mandibular angle fractures: a demographic review, with particular reference to post-operative complications.

BACKGROUND: Mandibular angle fractures (MAF) have a recognized complexity of treatment and an increased risk of incurring complications. METHODS: This retrospective study included 45 consecutive patients who were diagnosed with an isolated MAF and no other facial fractures. The average age was 27.3 (SD = 7.7). RESULTS: A comparatively low rate of complications (11.1%) and a low rate of reoperation (1.8%) are reported, along with a significant role of smoking in complications (p = 0.022). A non-significant association was noted between complications, male gender and assault as an aetiological factor. CONCLUSIONS: Review of the data from this study confirms that complication rates for patients attending the National Maxillofacial Unit are similar to or better than that of international studies. An overview of the aetiology of fracture complications is included.

Pathological mandibular fracture complicated by osteonecrosis in an adult patient with pycnodysostosis: clinical report and review of the literature.

Pycnodysostosis is an ultra-rare osteosclerotic skeletal disorder characterized by short stature, susceptibly to fractures, acroosteolysis of the distal phalanges, and craniofacial features (frontal bossing, prominent nose, obtuse mandibular angle, micrognathia). Dental abnormalities (delayed eruption of teeth, hypodontia, malocclusion, dental crowding, persistence of deciduous teeth, enamel hypoplasia, and increased caries) are also frequent; due to bone metabolism alteration, the patients have an increased risk for jaw osteomyelitis, especially after tooth extraction or mandible fracture. Other complications are obstructive sleep apnea, endocrine alterations and cytopenia. Pycnodysostosis is caused by biallelic loss of function variants in CTSK gene, coding the lysosomal protease cathepsin K. CTSK is involved in the degradation of bone matrix proteins, such as type I and type II collagen. In pycnodysostosis, this degradation is decreased, leading to increased bone density and bone fragility with pathological fractures and poor healing. We present a clinical report of a female adult patient with typical pycnodysostosis phenotype. At the age of 52 years, she had a pathological spontaneous fracture of the right mandible complicated by osteonecrosis, treated with load bearing osteosynthesis. The direct sequencing of CTSK gene revealed the presence of the pathogenic homozygous variant c.746T>A, (p.Ile249Asn), that confirmed the diagnosis of pycnodysostosis. We also review the literature case series published to date, that suggest to always consider the diagnosis of pycnodysostosis in case of osteosclerosis, even in the absence of brachydactyly or short stature. This report details the natural history of the disease in this patient, from childhood to adulthood, and highlights the importance of a quality of life assessment. In addition, we describe a case of mandibular osteonecrosis and spontaneous fracture in pycnodysostosis, drawing attention on the maxillofacial complications in these patients and on the importance of a personalized follow-up.

Factors Affecting the Duration of Surgery in the Management of Condylar Head Fractures.

Prolonged operation times should be avoided due to the associated complications and negative effects on the efficiency of the use of operating room resources. Surgical treatment of mandibular condylar head fractures is a well-established routine procedure at our department, nevertheless, we recognized fluctuating operating times. This study aims to pinpoint the influencing factors, in particular the hypothesis whether the efficiency of intraoperative muscle relaxation may decisively affect the duration of surgery. It analyses 168 mandibular condylar head fractures that were surgically treated in the period from 2007 to 2022 regarding the duration of the surgery and potential factors affecting it. The potential predictors' influence on the dependent variable operation time was mainly calculated as a bivariate analysis or linear regression. Efficiency of relaxation (p ≤ 0.001), fragmentation type (p = 0.031), and fracture age (p = 0.003) could be identified as decisive factors affecting the duration of surgery, as the first surgeon was a constant. In conclusion, surgical intervention should start as soon as possible after a traumatic incident. In addition, a dosage regimen to optimize the efficiency of relaxation should be established in future studies. Fragmentation type and concomitant fractures should also be considered for a more accurate estimation of the operating time.

Development and validation of a digital twin of the human lower jaw under impact loading by using non-linear finite element analyses.

Mandibular fractures are one of the most frequently observed injuries within craniofacial region mostly due to tumor-related problems and traumatic events, often related to non-linear effects like impact loading. Therefore, a validated digital twin of the mandible is required to develop the best possible patient-specific treatment. However, there is a need to obtain a fully compatible numerical model that can reflect the patients' characteristics, be available and accessible quickly, require an acceptable level of modeling efforts and knowledge to provide accurate, robust and fast results at the same time under highly non-linear effects. In this study, a validated simulation methodology is suggested to develop a digital twin of mandible, capable of predicting the non-linear response of the biomechanical system under impact loading, which then can be utilized to design treatment strategies even for multiple fractures of the mandibular system. Using Computed Tomography data containing cranial (skull) images of a patient, a 3-dimensional mandibular model, which consists cortical and cancellous bones, disks and fossa is obtained with high accuracy that is compatible with anatomical boundaries. A Finite Element Model (FEM) of the biomechanical system is then developed for a three-level validation procedure including (A) modal analysis, (B) dynamic loading and (C) impact loading. For the modal analysis stage: Free-free vibration modes and frequencies of the system are validated against cadaver test results. For the dynamic loading stage: Two different regions of the mandible are loaded, and maximum stress levels of the system are validated against finite element analyses (FEA) results, where the first loading condition (i) transfers a 2000 N force acting on the symphysis region and, the second loading condition (ii) transfers a 2000 N force acting on the left body region. In both cases, equivalent muscle forces dependent on time are applied. For the impact loading stage: Thirteen different human mandibular models with various tooth deficiencies are used under the effects of traumatic impact forces that are generated by using an impact hammer with different initial velocities to transfer the impulse and momentum, where contact forces and fracture patterns are validated against cadaver tests. Five different anatomical regions are selected as the impact site. The results of the analyzes (modal, dynamic and impact) performed to validate the digital twin model are compared with the similar FEA and cadaver test results published in the literature and the results are found to be compatible. It has been evaluated that the digital twin model and numerical models are quite realistic and perform well in terms of predicting the biomechanical behavior of the mandible. The three-level validation methodology that is suggested in this research by utilizing non-linear FEA has provided a reliable road map to develop a digital twin of a biomechanical system with enough confidence that it can be utilized for similar structures to offer patient-specific treatments and can help develop custom or tailor-made implants or prosthesis for best compliance with the patient even considering the most catastrophic effects of impact related trauma.

Surgical Correction of Post-traumatic Residual Deformity of the Mandible: A Case Report.

Mandibular fractures are the most common trauma cases that we often come across in our day-to-day practice of oral and maxillofacial surgery. Various factors can lead to deformities and make those cases more challenging, which includes a delay in surgical treatment, resulting in non-union or malunion of the fracture site causing occlusal disturbances and functional abnormalities in the temporomandibular joint.

Analysis of Mandibular Muscle Variations Following Condylar Fractures: A Systematic Review.

This review analyzes muscle activity following mandibular condylar fracture (CF), with a focus on understanding the changes in masticatory muscles and temporomandibular joint (TMJ) functioning. MATERIALS AND METHODS: The review was conducted following the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines. A search was performed on online databases using the keywords "masticatory muscles" AND ("mandibular fracture" OR "condylar fracture"). The eligibility criteria included clinical trials involving human intervention and focusing on muscle activity following a condylar fracture. RESULTS: A total of 13 relevant studies were reviewed. Various studies evaluated muscle activity using clinical evaluation, bite force measurement, electromyography (EMG), magnetic sensors and radiological examinations to assess the impact of mandibular fractures on masticatory muscles. CONCLUSIONS: Mandibular condylar fractures can lead to significant changes in muscle activity, affecting mastication and TMJ functioning. EMG and computed tomography (CT) imaging play crucial roles in assessing muscle changes and adaptations following fractures, providing valuable information for treatment planning and post-fracture management. Further research is required to explore long-term outcomes and functional performance after oral motor rehabilitation in patients with facial fractures. Standardized classifications and treatment approaches may help improve the comparability of future studies in this field.

Mandibular metastasis of pulmonary adenocarcinoma: How unexpected could it be?

OBJECTIVE: Metastatic tumours of bone must be considered in all patients with unexplained bone pain and particularly in patients who present with a known cancer, localised pain at multiple sites, and radiographic findings suggestive of metastasis. The purpose of this report was to present a case of a pathological fracture of the mandible as a consequence of metastatic pulmonary adenocarcinoma. MATERIALS AND METHODS: In July 2018 a 68-year-old male patient was hospitalised because of pulmonary adenocarcinoma and attended our department for an oral maxillo-facial evaluation. He complained of pain and swelling in the right temporomandibular region resulting in a reported functional limitation. An Orthopantomogram (OPG) demonstrated a right intracapsular condylar compound fracture associated with an osteolytic lesion at the condyle base with jagged margins. Subsequently, a CT scan with contrast of the maxillo-facial complex and a fine-needle aspiration of the lesion was performed. RESULTS: CT images showed the presence of a right mandibular condyle fracture associated with a large osteolytic lesion which confirmed the pathological nature of the fracture. Fine-needle aspiration of the lesion confirmed its metastatic nature. It was not possible to proceed with a mandibular resection due to the critical clinical condition of the patient who died in September 2018. CONCLUSION: Lung cancer frequently produces lytic-type metastasis, sometimes even in the jaw. In patients with an established diagnosis of lung cancer, any radiolucent lesion of the jaw or an unexplained painful symptomatology to the oro-maxillo facial complex should be placed in differential diagnosis with metastasis of the primary tumour.

Use of chin sling for conservative treatment of mandibular fracture in a guinea pig (Cavia porcellus).

OBJECTIVE: To describe a treatment for a mandibular fracture in a guinea pig (Cavia porcellus). ANIMAL: A 6-month-old sexually intact male guinea pig referred for a 24-hour history of hyporexia. CLINICAL PRESENTATION, PROGRESSION, AND PROCEDURES: Physical examination showed lateral displacement of the incisors and inflammation and crepitation during mandible lateralization. Imaging tests revealed a minimally displaced complete oblique fracture of the left mandible with fracture of the left mandibular first premolar tooth and incisor tooth. TREATMENT AND OUTCOME: Conservative treatment was established by placing a chin sling (CS) to immobilize the jaw and a nasogastric tube for nutritional support. Imaging tests repeated 3 weeks later showed initial callus formation, and the conservative treatment was discontinued. Follow-up examinations showed appetite and progressive weight gain. Five months later, the clinical crown of the left mandibular incisor was absent and a resorptive lesion on the left mandibular first premolar tooth was detected. Complete ossification of the fracture without premolar and moler teeth elongation was observed on control imaging tests. Ten months after initial examination, the patient was reportedly healthy with no signs of pain or dental disease. CLINICAL RELEVANCE: Jaw fracture treatments in guinea pigs are poorly described in the literature. Surgical treatment can be challenging in this species due to its skull and dental anatomy. Although CS was originally employed to increase the congruency of premolar and molar teeth after coronal reduction, this device yielded satisfactory results as a noninvasive, inexpensive treatment of a mandibular fracture in this guinea pig. Alopecia on the back of the head was the only undesired adverse effect associated with the CS.

Pediatric Maxillofacial Trauma: Insights into Diagnosis and Treatment of Mandibular Fractures in Pediatric Patients.

Aim: To assess the diagnostic and therapeutic approaches in pediatric mandibular fractures with regards to fracture pattern and localization. Patients and methods: This retrospective study included patients under the age of 17 years that presented to the Department of Oral and Maxillofacial Surgery at Charité-Universitätsmedizin Berlin with mandibular fractures over an 11-year long period (2010-2020). Medical records were analyzed for age, gender, injury mechanism, clinical presentation, imaging modalities, fracture pattern, and fracture management. Statistical analyses included descriptive statistics, normality testing, and Mann-Whitney U tests. Results: A total of 91 pediatric patients (23 females and 68 males) presented with mandibular fractures. The majority of mandibular fractures occurred in patients aged 13-16 years (67.0%, n = 61). The main causes were activities of daily life (34.1%), followed by assault (25.3%). Malocclusion and pain upon mandibular joint compression were documented in 72.5% and 51.7% of patients, respectively. The most frequently applied radiological diagnostic tool was a panoramic X-ray (49.5%). The main fracture patterns were single (42.9%) and double fractures (48.4%). An age-adapted surgical approach using open reduction and internal fixation (ORIF) was the most frequent management (61.5%). A conservative approach was favored in cases of condylar head fractures. Resorbable plates were used in eight cases of ORIF (8.8%). Conclusion: Treatment regimens should be carefully selected based on the unique anatomy of the pediatric patient with regards to centers of growth and dentition phase, to restore stomatognathic function and to maintain adequate skeletal growth and eruption of teeth. Clinical significance: This study illustrates the challenges of mandibular fracture management in the pediatric patient. How to cite this article: Hofmann E, Koerdt S, Heiland M, et al. Pediatric Maxillofacial Trauma: Insights into Diagnosis and Treatment of Mandibular Fractures in Pediatric Patients. Int J Clin Pediatr Dent 2023;16(3):499-509.